All references into Cisco Unified Communications Manager documentation have been updated to support all
Cisco Unified Communications Manager releases.
Table 2: Cisco IP Phone 8800 Administration Guide Revisions for Firmware Release 11.5(1)SR1
Updated SectionRevision
•
Phone Power Requirements, on page 10
•
Network Protocols, on page 12
•
Phone Overview, on page 23
•
Buttons and Hardware, on page 30
•
Accessory Support
Updated for Cisco IP Phone 8865NR support
Features Available in Enhanced Line Mode, on page
190
Updated for Recording and Monitoring support on
Enhanced Line Mode
Set up Wireless LAN, on page 43Updated for WLAN Scan List support
Set Up Wireless LAN from Phone, on page 44
Set SSID Field, on page 61
Set Security Mode Field, on page 61
Set 802.11 Mode Field, on page 62
Set Up Do Not Disturb, on page 161Updated for Do not disturb with MLPP support
Set up AS-SIP, on page 181
Product Specific Configuration, on page 138Updated for Configurable Ringer support
Security Enhancements for Your Phone Network, on
page 83
Enhanced Security
Updates to Cisco IP Phone Web Page, on page 217
New presentation of phone feature configuration in
Cisco Unified Communications Manager Phone
Feature Configuration, on page 136
General changes
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
2
New and Changed Information
New Information for Firmware Release 11.5(1)SR1
To Next Page
Loading...
Need help?
General
