Cisco 8811

Table 34: Ethernet Statistics Information
DescriptionItem
Number of packets that the phone received.Rx Frames
Number of packets that the phone sent.Tx Frames
Number of broadcast packets that the phone received.Rx Broadcasts
Cause of the last reset of the phone. Specifies one of the following values:
•
Initialized
•
TCP-timeout
•
CM-closed-TCP
•
TCP-Bad-ACK
•
CM-reset-TCP
•
CM-aborted-TCP
•
CM-NAKed
•
KeepaliveTO
•
Failback
•
Phone-Keypad
•
Phone-Re-IP
•
Reset-Reset
•
Reset-Restart
•
Phone-Reg-Rej
•
Load Rejected HC
•
CM-ICMP-Unreach
•
Phone-Abort
Restart Cause
Amount of time that has elapsed since the phone last rebooted.Elapsed Time
Link state and connection of the Network port. For example, Auto 100
Mb Full-Duplex means that the Network port is in a link-up state and has
autonegotiated a full-duplex, 100-Mbps connection.
Port 1
Link state and connection of the PC port.Port 2
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
209
Cisco IP Phone Status