27-15
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 27 Classifying and Scheduling Packets for ASR 1000 Series
Information About Ingress Classification
Classifying Inner or Outer VLAN COS Values
To enable packet classification based on VLAN COS values for Inner or Outer VLAN of a 802.1Q
subinterface or qinq subinterface, execute the following set of commands from QinQ subinterface
configuration mode:
SUMMARY STEPS
1. enable
2. configure terminal
3. interface gigabitEthernet 0/0/0.1
4. plim qos input map cos inner-based
5. plim qos input map cos inner 5 6 queue strict-priority
6. plim qos input map cos outer-based
7. plim qos input map cos outer 4 queue strict-priority