Cisco ASR 1000

IN-2
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
line coding errors 8-6
LOF 8-6
RAI 8-6
SPA system messages 8-6
ATMSPA system messages 8-6
automatic SPA FPD image upgrade
(example) 26-7
disabling 26-3
re-enabling 26-4
autonegotiation
configuring 10-10
disabling on fiber interfaces 10-11
enabling on fiber interfaces 10-12
B
blank filler plate
for empty subslots in a SIP 2-1
single-height size 2-3
C
carriage return (<cr>) 1-7
cautions, usage in text i-xxviii
CEF 6-1, 7-1, 8-1, 23-1
CEF for PFC2
See CEF
channel group, changing configuration 15-12
channelized DS3 mode, configuring 19-8
Cisco ASR 1000 Series Routers
SIP description 3-2
SIP features 3-2
Cisco Discovery Protocol 10-12
Cisco IOS configuration changes, saving 1-10
Cisco MIB Locator 9-6
CLI 1-1
clock signal, inverting 18-9
codec (DSP profile) command 25-3
command-line interface. See CLI.
command line processing 1-5
command modes 1-6
command modes, understanding 1-6
commands
context-sensitive help for abbreviating 1-7
debug 5-1
default form, using 1-10
hardware module slot 4-3
no form, using 1-10
resetting a SIP 4-3
show 5-2
show interfaces serial
troubleshooting serial lines 20-4
command syntax
conventions i-xxvii
displaying (example) 1-7
conditions - status line, show interfaces serial
command
20-3
configurations, saving 1-10
configuration tasks, required
4-Port Serial Interface SPA 18-2
for the Fast Ethernet SPA 10-2
for the Gigabit Ethernet SPA 10-2
configure terminal command 10-2
configuring SPAs
Fast Ethernet 10-1
copy command 10-15
course wave division multiplexer (CWDM)