Cisco ASR 1000

IN-6
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
architecture 12-6
configuring 13-1, 22-1, 25-1
framing 13-3
interface address 13-1
keepalive 13-5
modifying CRC size 13-6
payload scrambling 13-8
restrictions 12-5
supported features 12-3
ping command 8-4, 23-15
platforms, supported - release notes 1-11
privileged EXEC mode, summary of 1-6
prompts, system 1-6
Q
question mark (?) command 1-7
R
release history
Fast Ethernet SPAs 9-2
Gigabit Ethernet SPAs 9-2
SIP 3-1
ROM monitor mode, summary of 1-6
router console 1-1
connecting 1-2
running configuration, saving to NVRAM 10-15
S
saving configuration changes 1-10
scramble, configuring 16-15, 17-9
SDH mode, configuring 19-6
serial lines
troubleshooting
show interfaces serial command 20-4
Serial SPAs
2-Port and 4-Port Channelized T3 SPA 16-1
2-Port and 4-Port Clear Channel T3/E3 SPAs 17-1
8-Port Channelized T1/E1 SPA 15-1
release history 14-1
restrictions 14-4
serial SPAs
1-Port Channelized STM-1-OC-3 19-1
4-Port Serial Interface SPA 18-1
SFP (small form-factor pluggable) optics
Cisco qualification check 2-5
qualified for SPAs (table) 2-5, 2-6, 2-7, 2-8
SFP-GE-T
speed and duplex configuration 10-11
shared port adapter. See SPA.
show atm interface atm command 7-8
show atm pvc command 7-11
show atm pvc interface atm command 8-6
show atm traffic shaping slot command 8-6
show atm vc interface atm command 7-11
show command 11-2
show controllers atm command 6-6
example 6-10
show controllers command 6-9
show diag slot command 4-2
show diag sub-slot command 4-2
show history command 1-5
show hw-module subslot all oir command 5-8
show hw-module subslot command 26-5
show hw-module subslot fpd command 26-10