Cisco ASR 1000

IN-7
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
show hw-module subslot service-engine status
example 21-6
show hw-module subslot service-engine status
command
21-6
show hw-module subslot transceiver idprom
command
10-16, 10-17
show interface command 7-6
show interfaces atm command 7-5
example 6-10
show interfaces command 6-9, 9-8, 11-2
show interface serial command 19-14
show interface service-engine command 21-6
example 21-6
show interfaces fastethernet 11-2
show interfaces gigabitethernet command 10-4, 10-7, 11-2
show interfaces serial command 20-4
show interfaces tengigabitethernet command 9-8, 11-2
show ip interface command 5-8, 7-6
show module command 5-4
show mpls interface command 7-6
show platform command 4-2
show standby command 10-5
show upgrade package default command 26-6
show upgrade progress command 26-7
show vlans command 10-14
shutdown command 10-15
SIP (SPA interface processor)
activation (example) 5-9
blank filler plates 2-1
configuring 4-1
deactivating 5-3
deactivation (example) 5-8
definition 2-1
features supported 3-2
general characteristics 2-1
hardware type, displaying ?? to 3-3
identifying slots and subslots 4-1
reactivating 5-3
release history 3-1
SPA compatibility (table) 2-3, 2-4
subslots
description 2-1
numbering 4-2
specifying location in CLI 4-2
troubleshooting 5-1
SNAP (Subnetwork Access Protocol) encapsulation 10-6,
10-10
SONET mode, configuring 19-4
SPA (shared port adapter)
activation (example) 5-9
architecture, description 9-7
automatic recovery 11-6
deactivating 5-6
deactivation (example) 5-9
definition 2-2
double-height description 2-2
FPD image packages, overview 26-2
Gigabit Ethernet 9-1
interfaces 2-2
online removal 5-5
optics compatibility (table) 2-5, 2-6, 2-7, 2-8
POS SPA architecture 12-6
reactivating 5-7
single-height description 2-2
SIP compatibility (table) 2-3, 2-4
SPA architecture
description ?? to 9-8
POS SPA description ?? to 12-8