Cisco Catalyst 2950 Command Reference

Contents
xii
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-11381-12
wrr-queue bandwidth 2-561
wrr-queue cos-map 2-563
APPENDIX A Catalyst 2955 Alarm Commands A-1
alarm facility fcs-hysteresis A-2
alarm facility power-supply A-3
alarm facility temperature A-4
alarm profile (global configuration) A-6
alarm profile (interface configuration) A-8
fcs-threshold A-9
power-supply dual A-10
show alarm description port A-11
show alarm profile A-12
show alarm settings A-14
show env A-16
show facility-alarm relay A-18
show facility-alarm status A-19
show fcs-threshold A-20
test relay A-21
APPENDIX B Catalyst 2950 and 2955 Switch
Boot Loader Commands
B-1
boot B-2
cat B-4
copy B-5
delete B-6
dir B-7
flash_init B-9
format B-10
fsck B-11
help B-12
load_helper B-13
memory B-14
mkdir B-16
more B-17
rename B-18

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz