Cisco Catalyst 2950 Command Reference

Contents
xiii
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-11381-12
reset B-19
rmdir B-20
set B-21
type B-24
unset B-25
version B-27
APPENDIX C Catalyst 2950 and 2955 Switch Debug Commands C-1
debug auto qos C-2
debug dot1x C-4
debug etherchannel C-5
debug lre C-6
debug pagp C-7
debug pm C-8
debug spanning-tree C-10
debug spanning-tree backbonefast C-12
debug spanning-tree bpdu C-13
debug spanning-tree bpdu-opt C-14
debug spanning-tree mstp C-15
debug spanning-tree switch C-17
debug spanning-tree uplinkfast C-19
debug switch dhcp C-20
debug sw-vlan C-21
debug sw-vlan ifs C-23
debug sw-vlan notification C-24
debug sw-vlan vtp C-26
debug udld C-28
I NDEX

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz