Cisco Catalyst 2950

2-273
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show auto qos
Examples This is an example of output from the show auto qos command after the auto qos voip cisco-phone and
the auto qos voip cisco-softphone interface configuration commands are entered:
Switch> show auto qos
FastEthernet0/3
auto qos voip cisco-phone
FastEthernet0/4
auto qos voip cisco-softphone
FastEthernet0/5
auto qos voip cisco-phone
This is an example of output from the show auto qos interface interface-id command when
the auto qos voip cisco-phone interface configuration command is entered:
Switch> show auto qos interface fastethernet0/3
FastEthernet0/3
auto qos voip cisco-phone
This is an example of output from the show running-config privileged EXEC command when the auto
qos voip cisco-phone and the auto qos voip cisco-softphone interface configuration commands are
entered:
Switch# show running-config
Building configuration...
...
!
wrr-queue bandwidth 10 20 70 1
wrr-queue cos-map 1 0 1
wrr-queue cos-map 2 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
!
class-map match-all AutoQoS-VoIP-RTP-Trust
match ip dscp 46
class-map match-all AutoQoS-VoIP-Control-Trust
match ip dscp 24 26
!
policy-map AutoQoS-Police-SoftPhone
class AutoQoS-VoIP-RTP-Trust
set ip dscp 46
police 1000000 4096 exceed-action drop
class AutoQoS-VoIP-Control-Trust
set ip dscp 24
police 1000000 4096 exceed-action drop
!
mls qos map cos-dscp 0 8 16 26 32 46 48 56
...
interface FastEthernet0/3
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
!
interface FastEthernet0/4
service-policy input AutoQoS-Police-SoftPhone
auto qos voip cisco-softphone
!