2-545
Catalyst 2950 and Catalyst 2955 Switch Command Reference
OL-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
vlan database
Name: fddi-default
Media Type: FDDI
VLAN 802.10 Id: 101002
State: Operational
MTU: 1500
Bridge Type: SRB
Ring Number: 0
Translational Bridged VLAN: 1
Translational Bridged VLAN: 1003
<output truncated>
This is an example of output from the show changes command:
Switch(vlan)# show changes
DELETED:
Name: VLAN0004
Media Type: Ethernet
VLAN 802.10 Id: 100004
State: Operational
MTU: 1500
DELETED:
Name: VLAN0006
Media Type: Ethernet
VLAN 802.10 Id: 100006
State: Operational
MTU: 1500
MODIFIED:
Current State: Operational
Modified State: Suspended
This example shows how to display the differences between VLAN 7 in the current database and the
proposed database:
Switch(vlan)# show changes 7
MODIFIED:
Current State: Operational
Modified State: Suspended
This is an example of output from the show current 20 command. It displays only VLAN 20 of the
current database:
Switch(vlan)# show current 20
Name: VLAN0020
Media Type: Ethernet
VLAN 802.10 Id: 100020
State: Operational
MTU: 1500
Related Commands Command Description
show vlan Displays the parameters for all configured VLANs in the administrative domain.
shutdown vlan Shuts down (suspends) local traffic on the specified VLAN.
vlan (global
configuration)
Enters config-vlan mode for configuring normal-range and extended-range
VLANs.