Cisco Catalyst 2950 - Page 682

Index
IN-12
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-11381-12
show cluster members command 2-284
show controller lre cpe command 2-296
show controllers ethernet-controller command 2-287
show controllers lre actual command 2-299
show controllers lre admin command 2-302
show controllers lre link monitor command 2-304
show controllers lre log 2-43
show controllers lre log command 2-307
show controllers lre profile command 2-309
show controllers lre sequence command 2-312
show controllers lre status command 2-314
show controllers lre version command 2-319
show controller utilization command 2-320
show current command 2-544
show dot1x command 2-322
show env command 2-326
show env power command A-16
show env temperature command A-16
show errdisable recovery command 2-327
show etherchannel command 2-329
show facility-alarm relay command A-18
show facility-alarm status command A-19
show fcs threshold command A-20
show file command 2-332
show flowcontrol command 2-335
show interfaces command 2-337
show interfaces counters command 2-346
show inventory command 2-349
show ip access-list command 2-350
show ip dhcp snooping binding command 2-353
show ip dhcp snooping command 2-352
show ip igmp profile command 2-355
show ip igmp snooping command 2-356
show ip igmp snooping command querier detail 2-359
show ip igmp snooping querier detail command 2-359
show lacp command 2-361
show lre upgrade command 2-363
show mac access-group command 2-367
show mac address-table command 2-370
show mac address-table multicast command 2-373
show mac address-table notification command 2-375
show mls masks 2-376
show mls qos interface command 2-378
show mls qos maps command 2-380
show monitor command 2-382
show mvr command 2-384
show mvr interface command 2-385
show mvr members command 2-387
show pagp command 2-389
show parser macro command 2-391
show policy-map command 2-394
show port-security command 2-396
show proposed command 2-544
show rps command 2-398
show running-config vlan command 2-400
show setup express command 2-402
show spanning-tree command 2-403
show storm-control command 2-408
show system mtu command 2-411
show udld command 2-412
show version command 2-415
show vlan command 2-417
show vlan command fields 2-418
show vmps command 2-420
show vtp command 2-423
show wrr-queue bandwidth command 2-428
show wrr-queue cos-map command 2-429
shutdown command 2-430
shutdown vlan command 2-431
signal to noise ratio 2-207
Smartports macros
See macros
SNMP host, specifying
2-436
snmp-server enable traps command 2-432
snmp-server host command 2-436
snmp trap mac-notification command 2-440
SNMP traps
enabling MAC address notification
2-192