Cisco Catalyst 3550

2-99
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
dot1x multiple-hosts
dot1x multiple-hosts
This is an obsolete command.
In past releases, the dot1x multiple-hosts interface configuration command was used to allow multiple
hosts (clients) on an IEEE 802.1x-authorized port.
Command History
Related Commands
Release Modification
12.1(8)EA1 This command was introduced.
12.1(14)EA1 The dot1x multiple-hosts interface configuration command was replaced by
the dot1x host-mode interface configuration command.
Command Description
dot1x host-mode Set the IEEE 802.1x host mode on an interface.
show dot1x Displays IEEE 802.1x statistics, administrative status, and operational status
for the switch or for the specified interface.