Cisco Catalyst 3550

2-50
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
clear pagp
clear pagp
Use the clear pagp privileged EXEC command to clear Port Aggregation Protocol (PAgP)
channel-group information.
clear pagp {channel-group-number [counters] | counters}
Syntax Description
Defaults This command has no default setting.
Command Modes Privileged EXEC
Command History
Examples This example shows how to clear channel-group information for a specific group:
Switch# clear pagp 10
This example shows how to clear channel-group traffic filters:
Switch# clear pagp counters
You can verify that information was deleted by entering the show pagp privileged EXEC command.
Related Commands
channel-group-number Channel group number. The range is 1 to 64.
counters Clear traffic filters.
Release Modification
12.1(4)EA1 This command was introduced.
Command Description
show pagp Displays PAgP channel-group information.