EasyManua.ls Logo

Cisco Catalyst 3550

Cisco Catalyst 3550
794 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-441
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show mls qos interface
trust state: not trusted
trust mode: trust cos
COS override: dis
default COS: 0
DSCP Mutation Map: Default DSCP Mutation Map
trust device: cisco-phone
This is an example of output from the show mls qos interface gigabitethernet0/1 buffers command:
Switch> show mls qos interface gigabitethernet0/1 buffers
GigabitEthernet0/1
Notify Q depth:
qid-size
1 - 25
2 - 25
3 - 25
4 - 25
qid WRED thresh1 thresh2
1 dis 100 100
2 dis 100 100
3 dis 100 100
4 dis 100 100
In the preceding display, the qid-size section shows the weight (the amount of space allocated to each
queue) as configured by the wrr-queue queue-limit interface configuration command. The next section
of the display shows the settings of the tail-drop thresholds for all four queues. The WRED column
shows that it is disabled, which means that tail drop is in effect. Tail-drop thresholds are configured by
using the wrr-queue threshold interface configuration command.
This is an example of output from the show mls qos interface fastethernet0/1 buffers command:
Switch> show mls qos interface fastethernet0/1 buffers
FastEthernet0/1
Minimum reserve buffer size:
100 100 100 100 100 100 100 100
Minimum reserve buffer level select:
4 2 5 7
This sample shows that the buffer size for all minimum-reserve levels is set to 100 packets. The last line
of the display shows that queue 1 selects minimum-reserve level 4, queue 2 selects minimum-reserve
level 2, queue 3 selects minimum-reserve level 5, and queue 4 selects minimum-reserve level 7.
This is an example of output from the show mls qos interface gigabitethernet0/1 queueing command:
Switch> show mls qos interface gigabitethernet0/1 queueing
GigabitEthernet0/1
Ingress expedite queue: dis
Egress expedite queue: ena
wrr bandwidth weights:
qid-weights
1 - 25
2 - 25
3 - 25
Dscp-threshold map:
d1 : d2 0 1 2 3 4 5 6 7 8 9
---------------------------------------
0 : 01 01 01 01 01 01 01 01 01 01
1 : 01 01 01 01 01 01 01 01 01 01
2 : 01 01 01 01 01 01 01 01 01 01
3 : 01 01 01 01 01 01 01 01 01 01
4 : 01 01 01 01 01 01 01 01 01 01
5 : 01 01 01 01 01 01 01 01 01 01
6 : 01 01 01 01
Cos-queue map:

Table of Contents

Other manuals for Cisco Catalyst 3550

Related product manuals