Cisco Catalyst 3550

2-46
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
clear l2protocol-tunnel counters
clear l2protocol-tunnel counters
Use the clear l2protocol-tunnel counters privileged EXEC command to clear the protocol counters in
protocol tunnel ports.
clear l2protocol-tunnel counters [interface-id]
Syntax Description
Defaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples This example shows how to clear Layer 2 protocol tunnel counters on an interface:
Switch# clear l2protocol-tunnel counters gigabitethernet0/3
Related Commands
interface-id (Optional) Specify interface (physical interface or port channel) on which to
clear protocol counters.
Release Modification
12.1(9)EA1 This command was introduced.
Command Description
l2protocol-tunnel Enable tunneling of Layer 2 protocols on an access or IEEE 802.1Q
tunnel port.
show l2protocol-tunnel Displays information about ports configured for Layer 2 protocol
tunneling.