Cisco Catalyst 3550

B-35
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Appendix B Catalyst 3550 Switch Debug Commands
debug span-session
debug span-session
Use the debug span-session privileged EXEC command to enable debugging of events occurring in the
platform-specific software that implements the Switched Port Analyzer (SPAN) feature. Use the no form
of this command to disable debugging.
debug span-session
no debug span-session
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug span-session command is the same as the no debug span-session command.
Related Commands
Release Modification
12.1(6)EA1 This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
show monitor Displays SPAN session information.