Cisco Catalyst 3550

2-363
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show fm interface
show fm interface
Use the show fm interface privileged EXEC command to display per-interface feature-manager
information. Use it with the show fm port-label privileged EXEC command to get information about
features applied to the interface.
show fm interface interface-id [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show fm interface gigabitethernet0/1 command:
Switch# show fm interface gigabitethernet0/1
Conflicts exist with layer 3 access groups.
Input Port Label:2
You can then use the show fm port-label 2 privileged EXEC command to view more detail.
This is an example of output from the show fm interface vlan 1 command with PBR enabled on the
interface.
Switch# show fm interface vlan 1
Input VLAN Label: 1
Output VLAN Label: 0 (default)
Policy Label: 9
Priority: normal
interface-id Specify an interface; valid interfaces include:
• physical interface—type and port number.
• port channel—port-channel port-channel-number (1 to 64).
• null—null 0.
• VLAN—vlan vlan-id (1 to 4094; do not enter leading zeros). VLAN
interfaces are VLANs that have a switch virtual interface (SVI) assigned.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(4)EA1 This command was introduced.
12.1(13)EA1 This command was modified to include policy-based routing (PBR)
information.