Cisco Catalyst 3550

2-447
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show monitor
Destination Ports: None
Encapsulation: DOT1Q
Ingress:Enabled, default VLAN=5
Reflector Ports: None
Filter VLANs: None
Dest RSPAN VLAN: None
Related Commands Command Description
monitor session Starts a new SPAN or RSPAN session, adds or deletes interfaces or VLANs
to or from an existing SPAN or RSPAN session, and filters SPAN source
traffic to specific source VLANs.