Cisco Catalyst 3550

2-336
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show controllers switch
show controllers switch
Use the show controllers switch privileged user command to display the settings of the
resource-allocation priority or the wirespeed-store feature.
show controllers switch {resource-allocation priority | wirespeed-store} [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show controllers switch resource-allocation priority command:
Switch> show controllers resource-allocation priority
Switch Priority Resource Allocation is enabled.
Related Commands
resource-allocation priority Display the resource-allocation priority setting.
wirespeed-store Display the wirespeed setting.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(6)EA1 This command was introduced.
Command Description
switchcore
resource-allocation priority
switchcore wirespeed-store
Reserves switch resources for high-priority traffic or gives buffer
storage more priority than packet retrieval.