Cisco Catalyst 3550

2-283
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
police aggregate
Switch(config-pmap)# class class3
Switch(config-pmap-c)# trust dscp
Switch(config-pmap-c)# police aggregate agg_policer2
Switch(config-pmap-c)# exit
You can verify your settings by entering the show mls qos aggregate-policer privileged EXEC
command.
Related Commands Command Description
mls qos aggregate-policer Defines policer parameters, which can be shared by multiple
classes within a policy map.
show mls qos aggregate-policer Displays the quality of service (QoS) aggregate policer
configuration.