Cisco Catalyst 3550

2-483
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show tcam pbr
show tcam pbr
Use the show tcam pbr user EXEC command to display the policy-based routing (PBR) region of the
specified ternary content addressable memory (TCAM). Use the keywords to display information for a
specific TCAM ID or specific characteristics.
show tcam pbr tcam-id {{entries [entry-id]} | {port-labels [label-id]} | {vlan-labels [label-id]} |
{masks [mask-id]} | size | {statistics [entries | hits | labels | masks]}} [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
tcam-id Identify the TCAM ID for displaying PBR TCAM information.
entries [entry-id] Display one or all TCAM PBR entries and associated information. When all
entries appear, the mask information also appears. This display output is a
raw hex dump of information intended for a Cisco technical support
representative. The range is 0 to 65535.
port-labels [label-id] Display entries and associated information for a port label.
Note Though visible in the command-line help string, the port-labels
keyword is not supported for PBR.
vlan-labels [label-id] Display entries and associated information for a PBR VLAN label. This
display output is a raw hex dump of information intended for a Cisco
technical support representative. The range is 0 to 255.
masks [mask-id] Display mask information. This display output is a raw hex dump of
information intended for a Cisco technical support representative. The
range is 0 to 65535.
size Display the size of the PBR TCAM region.
statistics [entries | hits |
labels | masks]
Display allocation statistics for the PBR TCAM region, including allocated
and available masks and entries.
(Optional) Display allocation statistics for entries, hits, labels, or masks.
The labels keyword returns a total count of all labels present in TCAM.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(13)EA1 This command was introduced.