Cisco Catalyst 3550

2-482
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show tcam
This is an example of output from the show tcam outacl masks command for TCAM 1:
Switch> show tcam outacl 1 masks
Number of active masks : 6
Mask Index : 0
F0 00 00 00 00 00 00 00 00 80 FF 00 00 00 00 00 00 00
Mask Index : 1
F0 00 00 00 00 00 00 00 00 FF 00 00 00 00 00 00 00 00
Mask Index : 508
F4 00 00 00 00 00 00 00 00 80 FF 00 00 00 00 00 00 00
Mask Index : 509
F4 00 00 00 00 00 00 00 00 80 FF 00 00 00 00 00 00 00
Mask Index : 510
F0 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00
Mask Index : 511
F0 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00
This is an example of output from the show tcam inacl size command for TCAM 1:
Switch# show tcam inacl 1 size
Ingress ACL TCAM Size:6592 Entries
This is an example of output from the show tcam inacl statistics command for TCAM 1:
Switch# show tcam inacl 1 statistics
Ingress ACL TCAM#1:Number of active labels:3
Ingress ACL TCAM#1:Number of masks allocated: 14, available: 810
Ingress ACL TCAM#1:Number of entries allocated: 17, available:6575
Related Commands Command Description
show fm interface Displays per-interface feature-manager information. Used with the show fm
label command to show which features were able to fit into the hardware.
show fm Displays feature-manager information for a specified label to list features
associated with the label that were not able to fit into hardware.