Cisco Catalyst 3550

2-47
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
clear lacp
clear lacp
Use the clear lacp privileged EXEC command to clear Link Aggregation Control Protocol (LACP)
channel-group counters.
clear lacp {channel-group-number [counters]}
Syntax Description
Defaults This command has no default setting.
Command Modes Privileged EXEC
Command History
Examples This example shows how to clear channel-group information for a specific group:
Switch# clear lacp 4
This example shows how to clear channel-group traffic counters:
Switch# clear lacp counters
You can verify that the information was deleted by entering the show lacp privileged EXEC command.
Related Commands
channel-group-number Channel group number. The range is 1 to 64.
counters Clear traffic counters.
Release Modification
12.1(12c)EA1 This command was introduced.
Command Description
show lacp Displays LACP channel-group information.