Cisco Catalyst 3550

2-56
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
clear vtp counters
clear vtp counters
Use the clear vtp counters privileged EXEC command to clear the VLAN Trunking Protocol (VTP) and
pruning counters.
clear vtp counters
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to clear the VTP counters:
Switch# clear vtp counters
You can verify that information was deleted by entering the show vtp counters privileged EXEC
command.
Related Commands
Release Modification
12.1(4)EA1 This command was introduced.
Command Description
show vtp Displays general information about the VTP management domain, status,
and counters.