Cisco Catalyst 3550

2-2
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
aaa accounting dot1x
Defaults AAA accounting is disabled.
Command Modes Global configuration
Command History
Usage Guidelines This command requires access to a RADIUS server.
Note We recommend that you enter the dot1x reauthentication interface configuration command before
configuring IEEE 802.1x RADIUS accounting on an interface.
Examples This example shows how to configure IEEE 802.1x accounting:
Switch(config)# aaa accounting dot1x default start-stop group radius
Switch(config)#
Note The RADIUS authentication server must be properly configured to accept and log update or watchdog
packets from the AAA client.
Related Commands
Release Modification
12.2(20)SE This command was introduced.
Command Description
aaa authentication dot1x Specifies one or more AAA methods for use on interfaces running
IEEE 802.1x authentication.
dot1x re-authentication Enables or disables periodic reauthentication.
dot1x timeout reauth-period Sets the number of seconds between re-authentication attempts.