Cisco Catalyst 3550

2-496
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show vlan access-map
show vlan access-map
Use the show vlan access-map privileged EXEC command to display information about a particular
VLAN access map or all VLAN access maps.
show vlan access-map [mapname] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vlan access-map command:
Switch# show vlan access-map
Vlan access-map "map_1" 10
Match clauses:
ip address: ip1
Action:
drop
Vlan access-map "map_1" 20
Match clauses:
mac address: mac1
Action:
forward
Vlan access-map "map_1" 30
Match clauses:
Action:
drop
Related Commands
mapname (Optional) Name of a specific VLAN access map.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(4)EA1 This command was introduced.
Command Description
show vlan filter Displays information about all VLAN filters or about a particular VLAN or
VLAN access map.
vlan access-map Creates a VLAN map entry for VLAN packet filtering.
vlan filter Applies a VLAN map to one or more VLANs.