Cisco Catalyst 3550

2-365
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show fm vlan
show fm vlan
Use the show fm vlan privileged EXEC command to display per-VLAN feature-manager information.
Use with the show fm vlan-label privileged EXEC command to get information about features applied
to the VLAN.
show fm vlan vlan-id [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show fm vlan 1 command that shows an ACL configuration
conflict. It displays the VLAN label used in hardware for VLAN feature configuration.
Switch# show fm vlan 1
Conflicts exist with layer 2 access groups.
Input VLAN Label:1
Output VLAN Label:0 (default)
Priority:normal
Related Commands
vlan-id Any VLAN ID, whether or not a switch virtual interface (SVI) has been assigned. The
range is 1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(4)EA1 This command was introduced.
Command Description
show fm interface Displays per-interface feature manager information.
show fm Displays feature-manager information for a specified label and lists
configuration conflicts or features associated with that label that were not
able to fit into the hardware.