Cisco Catalyst 3550

B-8
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Appendix B Catalyst 3550 Switch Debug Commands
debug cpu-interface
debug cpu-interface
Use the debug cpu-interface privileged EXEC command to enable debugging of the driver for the
application-specific integrated circuit (ASIC) that interfaces the CPU to the switch ASIC. Use the no
form of this command to disable debugging.
debug cpu-interface
no debug cpu-interface
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug cpu-interface command is the same as the no debug cpu-interface command.
Related Commands
Release Modification
12.1(4)EA1 This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.ystem Management
Commands > Troubleshooting Commands.