Cisco Catalyst 3550

2-104
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
dot1x re-authentication
dot1x re-authentication
This is an obsolete command.
In past releases, the dot1x re-authentication global configuration command was used to set the amount
of time between periodic re-authentication attempts.
Command History
Related Commands
Release Modification
12.1(8)EA1 This command was introduced.
12.1(14)EA1 The dot1x reauthentication interface configuration command replaced the
dot1x re-authentication global configuration command.
Command Description
dot1x reauthentication Sets the number of seconds between re-authentication attempts.
show dot1x Displays IEEE 802.1x statistics, administrative status, and
operational status for the switch or for the specified interface.