Cisco Catalyst 3550

2-108
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
dot1x timeout
This example shows how to return to the default re-authorization period:
Switch(config-if)# no dot1x timeout reauth-period
This example shows how to set 30 as the number of seconds that the switch ignores EAPOL packets from
successfully authenticated clients:
Switch(config-if)# dot1x timeout ratelimit-period 30
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands Command Description
dot1x max-req Sets the maximum number of times that the switch sends an
EAP-request/identity frame before restarting the authentication process.
dot1x reauthentication Enables periodic re-authentication of the client.
show dot1x [interface
interface-id]
Displays IEEE 802.1x status for the specified interface.