Cisco Catalyst 3550

2-126
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
interface vlan
Examples This example shows how to create a new SVI with VLAN ID 23 and enter interface configuration mode:
Switch(config)# interface vlan 23
Switch(config-if)#
You can verify your setting by entering the show interfaces and show interfaces vlan vlan-id privileged
EXEC commands.
Related Commands Command Description
show interfaces vlan vlan-id Displays the administrative and operational status of all
interfaces or the specified VLAN.