Cisco Catalyst 3550

2-214
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
mac access-group
Examples This example shows how to apply a MAC extended ACL named macacl2 to an interface:
Switch(config)# interface fastethernet0/1
Switch(config-if)# mac access-group macacl2 in
You can verify your settings by entering the show mac access-group privileged EXEC command. You
can view configured ACLs on the switch by entering the show access-lists privileged EXEC command.
Related Commands Command Description
show access-lists Displays the ACLs configured on the switch.
show mac access-group Displays the MAC ACLs configured on the switch.
show running-config Displays the running configuration on the switch. For syntax
information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration
Fundamentals Command Reference, Release 12.2 > File
Management Commands > Configuration File Management
Commands.