Cisco Catalyst 3550

2-315
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show access-lists
10 permit host 1100.bb00.00cc host 2234.0123.2345
This is an example of output from the show access-lists hardware counters command:
Switch# show access-lists hardware counters
Input Drops: 0 matches (0 bytes)
Output Drops: 0 matches (0 bytes)
Input Forwarded: 234781 matches (19942889 bytes)
Output Forwarded: 0 matches (0 bytes)
Input Bridge Only: 0 matches (0 bytes)
Bridge and Route in CPU: 0 matches (0 bytes)
Route in CPU: 160 matches (10344 bytes)
Related Commands Command Description
access-list Configures a standard or extended numbered access list on the switch.
For syntax information, select Cisco IOS Release 12.2 Configuration
Guides and Command References > Cisco IOS IP Command
Reference, Volume 1 of 3: Addressing and Services, Release 12.2 >
IP Services Commands.
ip access list Configures a named IP access list on the switch. For syntax
information, select Cisco IOS Release 12.2 Configuration Guides and
Command References > Cisco IOS IP Command Reference, Volume
1 of 3: Addressing and Services, Release 12.2 > IP Services
Commands.
mac access-list extended Configures a named or numbered MAC access list on the switch.