2-343
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show dot1x
Examples This is an example of output from the show dot1x user EXEC command:
Switch> show dot1x
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Critical Recovery Delay 100
Critical EAPOL Disabled
This is an example of output from the show dot1x all user EXEC command:
Switch> show dot1x all
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Critical Recovery Delay 100
Critical EAPOL Disabled
Dot1x Info for FastEthernet0/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
ControlDirection = Both
HostMode = SINGLE_HOST
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
RateLimitPeriod = 0
<output truncated>
This is an example of output from the show dot1x all summary user EXEC command:
Interface PAE Client Status
--------------------------------------------------------
Fa0/1 AUTH none UNAUTHORIZED
Fa0/2 AUTH 00a0.c9b8.0072 AUTHORIZED
Fa0/3 AUTH none UNAUTHORIZED
This is an example of output from the show dot1x interface interface-id user EXEC command:
Switch> show dot1x interface fastethernet0/2
Dot1x Info for FastEthernet0/2
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
ControlDirection = In
HostMode = SINGLE_HOST
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
RateLimitPeriod = 0
This is an example of output from the show dot1x interface interface-id details user EXEC commmand:
Switch# show dot1x interface fastethernet0/2 details
Dot1x Info for FastEthernet0/2
To Next Page
Loading...
