2-345
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show dot1x
Related Commands
Ta b l e 2-18 show dot1x statistics Field Descriptions
Field Description
RxStart Number of valid EAPOL-start frames that have been received.
RxLogoff Number of EAPOL-logoff frames that have been received.
RxResp Number of valid EAP-response frames (other than response/identity
frames) that have been received.
RxRespID Number of EAP-response/identity frames that have been received.
RxInvalid Number of EAPOL frames that have been received and have an
unrecognized frame type.
RxLenError Number of EAPOL frames that have been received in which the packet
body length field is invalid.
RxTotal Number of valid EAPOL frames of any type that have been received.
TxReq Number of EAP-request frames (other than request/identity frames) that
have been sent.
TxReqId Number of Extensible Authentication Protocol (EAP)-request/identity
frames that have been sent.
TxTotal Number of Extensible Authentication Protocol over LAN (EAPOL)
frames of any type that have been sent.
RxVersion Number of received packets in the IEEE 802.1x Version 1 format.
LastRxSrcMac Source MAC address carried in the most recently received EAPOL
frame.
Command Description
dot1x
control-direction
Resets the configurable IEEE 802.1x parameters to their default values.
To Next Page
Loading...
