Cisco Catalyst 3550 User Manual

Contents
iv
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
boot enable-break 2-26
boot helper 2-27
boot helper-config-file 2-28
boot manual 2-29
boot private-config-file 2-30
boot system 2-31
channel-group 2-32
channel-protocol 2-36
class 2-38
class-map 2-40
clear ip arp inspection log 2-42
clear ip arp inspection statistics 2-43
clear ip dhcp snooping 2-44
clear l2protocol-tunnel counters 2-46
clear lacp 2-47
clear mac address-table 2-48
clear pagp 2-50
clear port-security 2-51
clear spanning-tree counters 2-53
clear spanning-tree detected-protocols 2-54
clear vmps statistics 2-55
clear vtp counters 2-56
cluster commander-address 2-57
cluster discovery hop-count 2-59
cluster enable 2-60
cluster holdtime 2-61
cluster member 2-62
cluster outside-interface 2-64
cluster run 2-65
cluster standby-group 2-66
cluster timer 2-68
define interface-range 2-69
delete 2-71
deny 2-72
deny (ARP access-list configuration) 2-75

Cisco Catalyst 3550 Specifications

General

Category	Switch
QoS	Yes
Form Factor	Rack-mountable
Manageable	Yes
RAM	64 MB
Model	Catalyst 3550
Uplink Ports	2 x GBIC (Gigabit Interface Converter) or SFP (Small Form-factor Pluggable)
Layer Support	Layer 3
VLAN Support	Yes
MAC Address Table Size	12000 entries
Routing Protocol	EIGRP
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Operating Humidity	10 - 95% (non-condensing)
Ports	24 or 48 10/100 ports