Cisco Catalyst 3550 User Manual

2-435
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show mac address-table static
All 0180.c200.0003 STATIC CPU
All 0180.c200.0004 STATIC CPU
All 0180.c200.0005 STATIC CPU
4 0001.0002.0004 STATIC Drop
6 0001.0002.0007 STATIC Drop
Total Mac Addresses for this criterion: 10
Related Commands Command Description
mac address-table static Adds static addresses to the MAC address table.
mac address-table static drop Enables unicast MAC address filtering and configures the
switch to drop traffic with a specific source or destination
MAC address.
show mac address-table address Displays MAC address table information for the specified
MAC address.
show mac address-table aging-time Displays the aging time in all VLANs or the specified
VLAN.
show mac address-table count Displays the number of addresses present in all VLANs or
the specified VLAN.
show mac address-table dynamic Displays dynamic MAC address table entries only.
show mac address-table interface Displays the MAC address table information for the
specified interface.
show mac address-table multicast Displays the Layer 2 multicast entries for all VLANs or the
specified VLAN.
show mac address-table notification Displays the MAC address notification settings for all
interfaces or the specified interface.
show mac address-table vlan Displays the MAC address table information for the
specified VLAN.

Cisco Catalyst 3550 Specifications

General

Category	Switch
QoS	Yes
Form Factor	Rack-mountable
Manageable	Yes
RAM	64 MB
Model	Catalyst 3550
Uplink Ports	2 x GBIC (Gigabit Interface Converter) or SFP (Small Form-factor Pluggable)
Layer Support	Layer 3
VLAN Support	Yes
MAC Address Table Size	12000 entries
Routing Protocol	EIGRP
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Operating Humidity	10 - 95% (non-condensing)
Ports	24 or 48 10/100 ports