Cisco Catalyst 3550

2-443
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show mls qos interface
Related Commands
Ta b l e 2-24 show mls qos interface statistics Field Descriptions
Field Description
Ingress incoming Number of packets or bytes with a specific DSCP entering the ingress
QoS process.
no_change Number of packets or bytes for which the DSCP value did not change
after classification.
classified Number of packets or bytes classified to this DSCP value.
policed Number of packets or bytes marked down from this DSCP value.
dropped (in bytes) Number of packets or bytes dropped by policing.
Egress incoming Number of packets or bytes with a specific DSCP entering the egress
QoS process.
no_change Number of packets with a specific DSCP that did not change.
classified Number of packets with a specific DSCP that were classified according
to the class map.
policed Number of packets or bytes marked down from this DSCP.
dropped (in bytes) Number of packets or bytes of this DSCP dropped.
WRED drop counts qid Queue number.
thresh1 and thresh2 Number of DSCPs of a specific value dropped at threshold 1 and
threshold 2.
FreeQ Amount of free queue space available per queue.
Command Description
mls qos monitor Defines up to 16 DSCP values for which byte or packet statistics are
gathered by hardware.