Cisco Catalyst 3550

2-476
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show spanning-tree
spanning-tree mst configuration Enters multiple spanning-tree (MST) configuration mode
through which the MST region configuration occurs.
spanning-tree mst cost Sets the path cost for MST calculations.
spanning-tree mst forward-time Sets the forward-delay time for all MST instances.
spanning-tree mst hello-time Sets the interval between hello BPDUs sent by root switch
configuration messages.
spanning-tree mst max-age Sets the interval between messages that the spanning tree
receives from the root switch.
spanning-tree mst max-hops Sets the number of hops in an MST region before the
BPDU is discarded and the information held for a port is
aged.
spanning-tree mst port-priority Configures an interface priority.
spanning-tree mst priority Configures the switch priority for the specified
spanning-tree instance.
spanning-tree mst root Configures the MST root switch priority and timers based
on the network diameter.
spanning-tree port-priority Configures an interface priority.
spanning-tree portfast (global
configuration)
Globally enables the BPDU filtering or the BPDU guard
feature on Port Fast-enabled ports or enables the Port Fast
feature on all nontrunking ports.
spanning-tree portfast (interface
configuration)
Enables the Port Fast feature on an interface and all its
associated VLANs.
spanning-tree uplinkfast Accelerates the choice of a new root port when a link or
switch fails or when the spanning tree reconfigures itself.
spanning-tree vlan Configures spanning tree on a per-VLAN basis.
Command Description