Cisco Catalyst 3550

2-489
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show udld
Switch# show udld gigabitethernet0/1
Interface Gi0/1
---
Port enable administrative configuration setting:Enabled / in aggressive mode
Port enable operational state:Enabled / in aggressive mode
Current bidirectional state:Unknown
Current operational state:Link down
Message interval:7
Time out interval:5
No neighbor cache information stored
Related Commands Command Description
udld Enables aggressive or normal mode in UDLD or sets the
configurable message timer time.
udld port Enables UDLD on an individual interface or prevents a fiber-optic
interface from being enabled by the udld global configuration
command.
udld reset Resets all interfaces shutdown by UDLD and permits traffic to begin
passing through them again.