Cisco Catalyst 3550 - Page 536

2-510
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
snmp-server enable traps
Related Commands Command Description
show running-config Displays the running configuration on the switch. For syntax information,
select Cisco IOS Release 12.2 Configuration Guides and Command
References > Cisco IOS Configuration Fundamentals Command
Reference, Release 12.2 > File Management Commands > Configuration
File Management Commands.
snmp-server host Specifies the host that receives SNMP traps.