Cisco Catalyst 3550

2-659
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-01
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
wrr-queue cos-map
Examples This example shows how to map CoS values 0 and 1 to queue 1, 2 and 3 to queue 2, 4 and 5 to queue 3,
6 and 7 to queue 4:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# wrr-queue cos-map 1 0 1
Switch(config-if)# wrr-queue cos-map 2 2 3
Switch(config-if)# wrr-queue cos-map 3 4 5
Switch(config-if)# wrr-queue cos-map 4 6 7
You can verify your settings by entering the show mls qos interface queueing privileged EXEC
command.
Related Commands Command Description
show mls qos interface queueing Displays the queueing strategy (WRR, priority queueing), the
weights corresponding to the queues, and the
CoS-to-egress-queue map.
wrr-queue dscp-map Maps DSCP values to the tail-drop or WRED thresholds of the
egress queues.