Cisco Catalyst 3550

B-4
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Appendix B Catalyst 3550 Switch Debug Commands
debug auto qos
4d22h: wrr-queue min-reserve 4 8
4d22h: no wrr-queue cos-map
4d22h: wrr-queue cos-map 1 0 1
4d22h: wrr-queue cos-map 2 2 4
4d22h: wrr-queue cos-map 3 3 6 7
4d22h: wrr-queue cos-map 4 5
4d22h: priority-queue out
Related Commands Command Description
auto qos voip Configure auto-QoS for voice over IP (VoIP) within a QoS domain.
show auto qos Displays the configuration applied and the new defaults in effect when
auto-QoS is enabled.
show debugging Displays information about the types of debugging that are enabled. For syntax
information, select Cisco IOS Release 12.2 Configuration Guides and
Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.