Cisco Catalyst 3550

2-58
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
cluster commander-address
This example shows how to remove a member from the cluster by using the cluster member console:
Switch # configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# no cluster commander-address
You can verify your settings by entering the show cluster privileged EXEC command.
Related Commands Command Description
show cluster Displays the cluster status and a summary of the cluster to which the switch
belongs.