Cisco Catalyst 3560-X - Page 1522

Index
IN-42
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
BGP 1-56
policy-based routing 1-100
router ACLs
defined
1-3
types of 1-5
route reflectors, BGP 1-63
router ID, OSPF 1-36
route selection, BGP 1-54
route summarization, OSPF 1-34
route targets, VPN 1-79
routing
default
1-3
dynamic 1-3
redistribution of information 1-96
static 1-3
routing domain confederation, BGP 1-63
Routing Information Protocol
See RIP
routing protocol administrative distances
1-94
RPS
See Cisco Redundant Power System 2300
RPS 2300
See Cisco Redundant Power System 2300
RSPAN
1-3
and stack changes 1-10
characteristics 1-9
configuration guidelines 1-17
default configuration 1-12
destination ports 1-8
displaying status 1-28
in a switch stack 1-3
interaction with other features 1-9
monitored ports 1-7
monitoring ports 1-8
overview 1-18, 1-1
received traffic 1-6
session limits 1-12
sessions
creating
1-18
defined 1-4
limiting source traffic to specific VLANs 1-20
specifying monitored ports 1-18
with ingress traffic enabled 1-22
source ports 1-7
transmitted traffic 1-6
VLAN-based 1-7
RSTP
active topology
1-9
BPDU
format
1-12
processing 1-13
designated port, defined 1-9
designated switch, defined 1-9
interoperability with IEEE 802.1D
described
1-8
restarting migration process 1-26
topology changes 1-13
overview 1-9
port roles
described
1-9
synchronized 1-11
proposal-agreement handshake process 1-10
rapid convergence
cross-stack rapid convergence
1-11
described 1-10
edge ports and Port Fast 1-10
point-to-point links 1-10, 1-25
root ports 1-10
root port, defined 1-9
See also MSTP
running configuration
replacing
1-20, 1-21
rolling back 1-20, 1-22
saving 1-16
S
SAP