Cisco Catalyst 3750 Metro - Page 213

2-185
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
ip sla server twamp
Examples This example shows how to configure a switch as an IP SLA TWAMP server:
Switch(config)# ip sla server twamp
Switch(config-twamp-srvr)# port 862
Switch(config-twamp-srvr)# timer inactivity 540
Related Commands Command Description
ip sla responder Enables the Cisco IOS IP Service Level Agreements (SLAs) responder for
general IP SLAs operations.
ip sla responder
twamp
Configures the switch as a Two-Way Active Measurement Protocol
(TWAMP) responder.
show ip sla standards (Optional) Displays the IP SLAs standards configured on the switch.
show ip sla twamp
connection {detail |
requests}
(Optional) Displays the current Cisco IOS IP Service Level Agreements
(SLAs) Two-Way Active Measurement Protocol (TWAMP) connections.