Cisco Catalyst 3750 Metro

B-104
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix B Catalyst 3750 Metro Switch Debug Commands
debug xconnect
debug xconnect
Use the debug xconnect privileged EXEC command to enable debugging of Layer 2 transport routing
using Ethernet over multiprotocol label switching (EoMPLS). Use the no form of this command to
disable debugging.
debug xconnect {error | event}
no debug xconnect {error | event}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug xconnect command is the same as the no debug xconnect command.
Related Commands
error Display xconnect authorization error debug messages.
event Display xconnect authorization event debug messages.
Release Modification
12.1(14)AX This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.