2-626
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
shutdown vlan
shutdown vlan
Use the shutdown vlan global configuration command to shut down (suspend) local traffic on the
specified VLAN. Use the no form of this command to restart local traffic on the VLAN.
shutdown vlan vlan-id
no shutdown vlan vlan-id
Syntax Description
Defaults No default is defined.
Command Modes Global configuration
Command History
Usage Guidelines The shutdown vlan command does not change the VLAN information in the VTP database. It shuts
down traffic locally, but the switch still advertises VTP information.
Examples This example shows how to shutdown traffic on VLAN 2:
Switch(config)# shutdown vlan 2
You can verify your setting by entering the show vlan privileged EXEC command.
Related Commands
vlan-id ID of the VLAN to be locally shut down. The range is 2 to 1001. VLANs defined as
default VLANs under the VLAN Trunking Protocol (VTP), as well as
extended-range VLANs (greater than 1005) cannot be shut down. The default
VLANs are 1 and 1002 to 1005.
Release Modification
12.1(14)AX This command was introduced.
Command Description
shutdown Shuts down local traffic on the VLAN when in config-VLAN mode (accessed
by the vlan vlan-id global configuration command).
To Next Page
Loading...
