B-44
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix B Catalyst 3750 Metro Switch Debug Commands
debug platform cfm
debug platform cfm
Use the debug platform cfm privileged EXEC command to enable debugging of the Ethernet
Connectivity Fault Management (CFM) service. Use the no form of this command to disable debugging.
debug platform cfm
no debug platform cfm
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines CFM is an end-to-end per-service-instance Ethernet layer operation, administration, and management
(OAM) protocol that provides connectivity monitoring, fault verification, and fault isolation for large
Ethernet networks.
The undebug platform cfm command is the same as the no debug platform cfm command.
Related Commands
Release Modification
12.2(25)SEG This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
To Next Page
Loading...
