Cisco Catalyst 3750 Metro

2-2
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
aaa accounting dot1x
Defaults AAA accounting is disabled.
Command Modes Global configuration
Command History
Usage Guidelines This command requires access to a RADIUS server.
Note We recommend that you enter the dot1x reauthentication interface configuration command before
configuring 802.1x RADIUS accounting on an interface.
Examples This example shows how to configure 802.1x accounting:
Switch(config)# aaa accounting dot1x default start-stop group radius
Switch(config)#
Note The RADIUS authentication server must be properly configured to accept and log update or watchdog
packets from the AAA client.
Related Commands
Release Modification
12.2(25)EY This command was introduced.
Command Description
aaa accounting dot1x Specifies one or more AAA methods for use on interfaces running 802.1x.
dot1x reauthentication Enables or disables periodic reauthentication.
dot1x test
eapol-capable
reauth-period
Sets the number of seconds between re-authentication attempts.